Post
OEM Blower Manufacturer vs Distributor: What Is the Difference?
## Quick Answer
Towwind Technology
Post
How to Diagnose a Blower System Using Current, Pressure and Airflow Data
## Quick Answer
Post
How to Measure Air Velocity at an Air Knife Outlet
## Quick Answer
Post
How Air Knife Gap Affects Pressure, Velocity and Energy Consumption
The air-knife gap is a small dimension with system-wide consequences. Changing it alters the discharge area, resistance, total air demand and pressure inside the knife. It can also change jet uniformity and the way water or debris leaves the product.
Post
Can You Recover Process Pressure Within the Existing Blower’s Motor Limit?
Use process-point measurements, the exact blower curve and electrical limits to decide whether useful pressure can be recovered without a larger motor.
Post
1 mm vs 1.5 mm Air Knife Gap: How Does Performance Change?
## Quick Answer
Post
What Questions Should You Ask a Blower Supplier Before Buying?
## Quick Answer
Post
Why Is My Blower Airflow Lower Than Expected?
Low blower airflow can appear as wet products, weak cleaning, poor aeration or a longer process cycle. Yet “low airflow” is often inferred from the process rather than measured. Pressure, velocity and airflow are related, but they are not interchangeable.
Post
Why Clean Cooling Air Matters for High-Speed Blower Reliability
## Quick Answer
Post
Can a Clogged Filter Increase Blower Energy Consumption?
## Quick Answer